How to remove the battery from JVC 250x Mini DV camcorder

In this post, I will go over the steps to remove the batter from the JVC Everio camcorder. Replacing or removing the battery may seem straightforward, but it can be confusing for some people.

Below is a set of photos that will aid in this demonstration.

The first thing you want to do is lift the viewfinder of the camera. This helps remove batteries much easier. Some older camcorders were built with this feature and it was helpful while filming something from a low angle.

In the next set of photos, I have placed a hand icon to represent where to move and push the button the finally remove the camera battery.

The next thing you want to do is to locate the battery release button. This is located on the back. Upper righthand corner and it should be labeled Battery Release. In some cases, this might have rubbed off. But as you can see the button should be visible.

Now with the button push the battery should come out very easily. Just lift it and it will disengage from the cradle.

These little mini DV camcorders were very popular in the 2000s and were on the market and high prices. Even the batteries were expensive. Nowadays you can find them on eBay and various other online sources for a bargain. If you collect these cameras or just like the vintage look from the footage, then this would certainly be worth checking out.

I still have and a times use my JVC Everio MG130. It is a step up from this camera and captures HD format with an internal HHD. 

With phones being fully capable of capturing incredible images these old camcorders and more novelty or nostalgia and are for enthusiasts. 

Another thing to consider is the DV tapes that the camera records. If you do want to use the JVC Everio 250X shown in this demonstration. You have to find a way to transfer the footage. Most PC or Macs do not have a way to connect the camera unless you use a capture card.

Captured cards are a good way to transfer your footage. However, not all capture cards are built the same and some may or may not give you the quality you would expect.

Another issue would be the battery. The batteries tend to lose power over time and it's difficult to say when they will fail. Sometimes you plug them in and charge them and they would only last for a few minutes before being exhausted.

I hope you found this article helpful. If you like another tutorial regarding this may I ask what kind of camera you are looking for? please let me know. ~Artemortifica